Pace recommendations – Configure your own training paces

, Posted in General

[Deutsche Version]

If you follow a training plan, you will usually want to know one thing before a training run: At what speed do you want to run? The question of the right tempo is very important primarily for intervals and endurance runs, but also for easy runs or long runs. There are many different philosophies, both concerning the names of the areas and their respective values. We used to show the athlete the fixed specifications from Daniels’ running formula, but in German-speaking countries the GA1/GA2 ranges should be much more common.

With the latest change in RUNALYZE you not only get the training areas back to Daniels, but you also have the possibility to choose between different training philosophies or make your own settings.

The whole thing is displayed as a panel “Training Paces” on the right side. By default, the panel should appear below the “Calculations”. If this is not the case so far, the section under Configuration -> Plugins can be activated.

Automatic adjustment

The training pace suggestions are based on your current form. The percentages refer to %vVO2max, the speed at your current effective VO2max (so 100% is about 12 minutes of competition pace). In this way, the paces are always adapted to your current shape. When defining individual training ranges, these must also be defined in %vVO2max.

This is what the panel looks like

Predefined training paces

The training areas of the following training philosophies are predefined:

  • Zintl & Eisenhut: REKOM, GA1, GA1/2, GA2 and WSA after “Ausdauertraining: Grundlagen, Methoden, Trainingssteuerung (7. Aufl.), München, BLV-Buchverlag, 2009″
  • Pöhlitz: DL-1, DL-2/1, DL-2/2, DL-3, TL-1, TL-2, TL-3/wSA, TL-SA according to la-coaching-academy.de
  • Running campus: SSL, LDL, MDL, ZDL by laufcampus.de
  • Daniels: Easy, Marathon, Threshold, Interval, Repetition after sweatelite.co

Specifications, which in the philosophies mentioned are actually made in %HFmax, were converted by us to %vVO2max.

Configure your own training paces

In the panel’s configuration, you can configure your own areas and specify which set of training areas should be displayed by default. Move the mouse over the title “Training speeds” and click on the setting wheel. You should now see the following form:

To configure your own set and make it the default one, change the default recommendation set to “Custom” and add your custom set by clicking on “+ Add pace

Just hit the Save button and will see your custom paces in the panel.

Start your analysis now

Create a free account and start analyzing your activities.

You can also sign up with your Facebook or Google account.

Questions?

Any questions left? We are there for you. Ask your questions in our Forum or Facebook Community.

Need help?

Do you have troubles with your account?
Contact our Support.